DSLR Camera Remote Control with TouchShield Slide
1. License agreement
Please read Liability Disclaimer and License Agreement CAREFULLY
2.1 The library's needed for this project must be unzipped and copied in to folderYourAntiPasto\hardware\arduino\cores\touchshield\src\components\libraries\
The archive contains also the EEPROM library (this is needed to store the remote parameters in to TouchShield Slide 4096 bytes of EEPROM). To a better understanding read
WARNING: Do notwrite anything into TouchShield Slide EEPROM from index 0 to 28. 0-27 are used to store screen calibration data and 28 (value 20)
is used to store a check for the same data.
2.2 Another bug in the AntiPasto IDE is the limit of 33 (in some cases 32) images that can be uploaded on the TouchShield Slide. The solution for this bug I've founded on
OpenMoCo.org. You can download the TouchShield OpenMoco UI code from their site (extract the files from openmoco-trunk.tar.gz\trunk\touchSlide in to
YourAntiPasto\hardware\arduino\cores\touchshield\src\components\board\or you can download and unzip the files used by me in the same folder - modified fonts included).
2.3 Download NewSoftSerial library from Arduiniana an copy it to YourAntiPasto\hardware\arduino\cores\arduino\src\components\libraries\.
2.4 Download GVI Camera Remote Control Touch - the sketch to upload in to Arduino Duemilanove (upload this sketch first and don't forget to press the programming button on the Slide).
2.5 Download GVI Camera Remote Control Arduino - the sketch to upload in to Arduino Duemilanove (second sketch to upload).
The following pins are used on Arduino board
|Sensor 1 Power
|Sensor 2 Power
|Device 1 Shutter
|Device 1 Focus
|Device 2 Shutter
|Device 2 Focus
|Read Battery (NA)
|Read Sensor 1
|Read Sensor 2
The Battery indicator is not yet implemented because at this moment i have no info about TouchShield Slide interrupts,
so if anyone can share some light on this problem is more than welcomed.
Also please post your suggestions or bug reports.
3. 3D file
The 3DXML file (download 3DXML Player)
4. Video demo
5. The case is made from LASER cut Acrylic GS panels at Formulor